Sonalika GT 20 vs Eicher 241
Comparing the Sonalika GT 20 and the Eicher 241 — the Eicher 241 carries 5 HP more, and the Eicher 241 is about ₹0.14 lakh cheaper ex-showroom. The specifications below are from the manufacturers; the section under them explains what those differences mean on an actual farm.
Which one should you buy?
Both of these are sold into the same segment, so the choice comes down to a handful of real differences rather than one being better than the other outright.
Price
The Eicher 241 is roughly ₹0.14 lakh cheaper ex-showroom — about 4% less than the Sonalika GT 20. On road that gap widens slightly, because RTO tax and insurance are calculated on the higher figure. Whether the Sonalika GT 20 earns that back depends entirely on the points below; if it does not, the cheaper machine is the better buy.
PTO power — the number that matters
Engine horsepower is the headline; PTO horsepower is what actually turns a rotavator or a thresher. Here the Eicher 241 delivers 11 HP more at the PTO (Sonalika GT 20: 10.3 HP, Eicher 241: 21.3 HP). That is roughly the difference between comfortably running a wider rotavator and working the engine hard to do it.
Lifting capacity
The Eicher 241 lifts 310 kg more (Sonalika GT 20: 650 Kg, Eicher 241: 960 Kg). This decides which mounted implements the tractor can actually carry, and it is where cheaper models usually cut corners. Check it against the heaviest implement you own — loaded weight, not the dry weight in the brochure.
2WD or 4WD
This is the biggest practical split between the two. The Sonalika GT 20 is four-wheel drive; the Eicher 241 is two-wheel drive. If you puddle paddy every season or work on slopes, 4WD is close to essential and worth the extra cost and fuel. On level, dry land doing mostly haulage, it is money spent for little return — take the Eicher 241.
Engine
The Sonalika GT 20 runs 3 cylinders against the Eicher 241's 1. More cylinders generally means smoother running and less vibration over a long day, at the cost of a little more fuel and slightly dearer servicing. Fewer cylinders is simpler to maintain, which matters if your nearest workshop is far.
Gearbox
Sonalika GT 20: 6 Forward +2 Reverse. Eicher 241: 5 Forward + 1 Reverse. Count the low-range speeds rather than the total — puddling and rotavating need slow ground speed at working engine revs, and a box with too few low gears forces a compromise between the two.
Weight
The Eicher 241 is about 820 kg heavier. Weight is an advantage when braking a loaded trolley or pulling hard in draft work, and a disadvantage in wet fields and on soft ground where the Sonalika GT 20 will compact less and sink less.
Other differences
They also differ on brakes (Mechanical vs Drum Brake, Dry Disc Brake (Optional) , Drum Oil Immersed Brakes (Optional)), warranty (2000 Hours Or 2 Year vs 1 Year). None of these decide the purchase on their own, but oil-immersed brakes and power steering are worth paying for if you spend long days on the machine.
The short answer
Taken together the Eicher 241 leads on more of the dimensions that affect day-to-day work. It is the safer pick unless the Sonalika GT 20 is meaningfully cheaper for you after the dealer quote.
- Wet fields, puddling or slopes: the Sonalika GT 20, because it is four-wheel drive. On dry level land the Eicher 241 does the same work for less.
- Wide rotavator, thresher or heavy PTO work: the Eicher 241 — it has the PTO horsepower to hold speed under load.
- Heavy mounted implements: the Eicher 241, which has the hydraulics to carry them.
- Loaded trolley and haulage: the Eicher 241 — the extra weight helps it brake and hold a load on a gradient.
- Tightest budget, or if none of the above apply to you: the Eicher 241. Paying for capability you never use is the most common and most expensive mistake at this size.
Before you decide
- Prices here are ex-showroom. Add roughly 7–10% for RTO registration and insurance, and get the on-road figure in writing from the dealer, itemised.
- Visit more than one dealer for each brand. Exchange value and finance terms vary between showrooms by more than the price gap between these two machines.
- Ask how far the nearest workshop is for each brand. A tractor that is down for a week in season costs more than the difference between these two.
- Drive both with an implement attached, not empty. An unloaded tractor tells you very little.
Specifications compared
| Specification | Sonalika GT 20 | Eicher 241 |
|---|---|---|
| Ex-showroom price | ₹3.74 - ₹4.09 Lakh* | ₹3.6 - ₹4.15 Lakh* |
| Engine | ||
| HP | 20 HP | 25 HP |
| Cylinders | 3 | 1 |
| Displacement (CC) | 959 CC | 1557 CC |
| Engine RPM | 2700 RPM | 1650 RPM |
| Air Filter | Oil Bath With Pre Cleaner | Oil bath type |
| Battery | 12 V 50 AH | 12 V 88 Ah |
| Cooling System | — | Air cooled |
| Transmission | ||
| Transmission Type | Sliding Mesh | Center shift Sliding mesh |
| Clutch | Single clutch | Single clutch |
| Gearbox | 6 Forward +2 Reverse | 5 Forward + 1 Reverse |
| Forward Speed | 23.9 kmph | 25.48 kmph |
| Reverse Speed | 12.92 kmph | — |
| Brakes | ||
| Brake Type | Mechanical | Drum Brake, Dry Disc Brake (Optional) , Drum Oil Immersed Brakes (Optional) |
| PTO | ||
| PTO Type | Multi Speed PTO | Live, Six splined shaft |
| PTO RPM | 575 /848/ 1463 | 540RPM @ 1715 ERPM |
| PTO Power (HP) | 10.3 HP | 21.3 HP |
| Hydraulics | ||
| Lifting Capacity (Kg) | 650 Kg | 960 Kg |
| 3 Point Linkage | ADDC | Draft, Position and Response control Links fitted with CAT-2 (Combi Ball) |
| Steering | ||
| Steering Type | Mechanical/Worm and screw type ,with single drop arm | Mechanical Steering/ |
| Steering Column | Worm and screw type ,with single drop arm | — |
| Dimensions & Weight | ||
| Total Weight (Kg) | 820 KG | 1640 KG |
| Wheelbase (MM) | 1420 MM | 1895 MM |
| Overall Length (MM) | 2580 MM | 3160 MM |
| Overall Width (MM) | 1110 MM | 1640 MM |
| Ground Clearance (MM) | 200 MM | 410 MM |
| Fuel Tank Capacity (L) | 31.5 litre | 35 litre |
| Turning Radius | — | 3040 MM |
| Wheels & Tyres | ||
| Wheel Drive | 4 WD | 2 WD |
| Front Tyre | 5.00 X 12 | 6.00 X 16 |
| Rear Tyre | 8.00 X 18 | 12.4 X 28 |
| Other | ||
| Warranty | 2000 Hours Or 2 Year | 1 Year |
| Accessories | TOOL, TOPLINK, CANOPY, HOOK, BUMPER, DRARBAR | Tipping trailer kit, Drawbar, Top link |
| Additional Features | — | High fuel efficiency, Steering Lock |
Related comparisons
- Sonalika GT 20 vs Powertrac Steeltrac 15
- Sonalika GT 20 vs Mahindra Yuvraj 215 NXT
- Eicher 241 vs Mahindra Yuvraj 215 NXT
- Sonalika GT 20 vs Farmtrac Steeltrac 18
- Eicher 241 vs Farmtrac Steeltrac 18
- Sonalika GT 20 vs Powertrac Steeltrac 18
- Eicher 241 vs Powertrac Steeltrac 18
- Sonalika GT 20 vs VST MT 171 DI - SAMRAAT
Compare other models
Build your own side-by-side comparison of any two tractors in the catalogue.
Open the comparison tool