VST MT 171 DI - SAMRAAT vs Powertrac 425 N

Which one should you buy?

Both of these are sold into the same segment, so the choice comes down to a handful of real differences rather than one being better than the other outright.

Price

The VST MT 171 DI - SAMRAAT is roughly ₹2.1 lakh cheaper ex-showroom — about 37% less than the Powertrac 425 N. On road that gap widens slightly, because RTO tax and insurance are calculated on the higher figure. Whether the Powertrac 425 N earns that back depends entirely on the points below; if it does not, the cheaper machine is the better buy.

PTO power — the number that matters

Engine horsepower is the headline; PTO horsepower is what actually turns a rotavator or a thresher. Here the Powertrac 425 N delivers 8.3 HP more at the PTO (VST MT 171 DI - SAMRAAT: 13 HP, Powertrac 425 N: 21.3 HP). That is roughly the difference between comfortably running a wider rotavator and working the engine hard to do it.

Lifting capacity

The Powertrac 425 N lifts 550 kg more (VST MT 171 DI - SAMRAAT: 750 Kg, Powertrac 425 N: 1300 Kg). This decides which mounted implements the tractor can actually carry, and it is where cheaper models usually cut corners. Check it against the heaviest implement you own — loaded weight, not the dry weight in the brochure.

Engine

The Powertrac 425 N runs 2 cylinders against the VST MT 171 DI - SAMRAAT's 1. More cylinders generally means smoother running and less vibration over a long day, at the cost of a little more fuel and slightly dearer servicing. Fewer cylinders is simpler to maintain, which matters if your nearest workshop is far.

Weight

The Powertrac 425 N is about 747 kg heavier. Weight is an advantage when braking a loaded trolley or pulling hard in draft work, and a disadvantage in wet fields and on soft ground where the VST MT 171 DI - SAMRAAT will compact less and sink less.

Other differences

They also differ on steering (MANUAL/POWER vs Power Steering / Mechanical (optional)). None of these decide the purchase on their own, but oil-immersed brakes and power steering are worth paying for if you spend long days on the machine.

The short answer

Taken together the Powertrac 425 N leads on more of the dimensions that affect day-to-day work. It is the safer pick unless the VST MT 171 DI - SAMRAAT is meaningfully cheaper for you after the dealer quote.

• Wide rotavator, thresher or heavy PTO work: the Powertrac 425 N — it has the PTO horsepower to hold speed under load.
• Heavy mounted implements: the Powertrac 425 N, which has the hydraulics to carry them.
• Loaded trolley and haulage: the Powertrac 425 N — the extra weight helps it brake and hold a load on a gradient.
• Tightest budget, or if none of the above apply to you: the VST MT 171 DI - SAMRAAT. Paying for capability you never use is the most common and most expensive mistake at this size.

Before you decide

• Prices here are ex-showroom. Add roughly 7–10% for RTO registration and insurance, and get the on-road figure in writing from the dealer, itemised.
• Visit more than one dealer for each brand. Exchange value and finance terms vary between showrooms by more than the price gap between these two machines.
• Ask how far the nearest workshop is for each brand. A tractor that is down for a week in season costs more than the difference between these two.
• Drive both with an implement attached, not empty. An unloaded tractor tells you very little.

Specifications compared

Related comparisons

• VST MT 171 DI - SAMRAAT vs Powertrac Steeltrac 15
• VST MT 171 DI - SAMRAAT vs Mahindra Yuvraj 215 NXT
• Powertrac 425 N vs Mahindra Yuvraj 215 NXT
• VST MT 171 DI - SAMRAAT vs Farmtrac Steeltrac 18
• Powertrac 425 N vs Farmtrac Steeltrac 18
• VST MT 171 DI - SAMRAAT vs Powertrac Steeltrac 18
• VST MT 171 DI - SAMRAAT vs Escorts Steeltrac
• Sonalika GT 20 vs VST MT 171 DI - SAMRAAT

Compare other models

Build your own side-by-side comparison of any two tractors in the catalogue.