Head to head

Escorts Steeltrac vs Powertrac 425 N

Comparing the Escorts Steeltrac and the Powertrac 425 N — the Powertrac 425 N carries 7 HP more, and the Escorts Steeltrac is about ₹3.21 lakh cheaper ex-showroom. The specifications below are from the manufacturers; the section under them explains what those differences mean on an actual farm.

Escorts Steeltrac tractor
Escorts

Escorts Steeltrac

18 HP 1 Cyl
₹2.44 - ₹2.73 Lakh*
Powertrac 425 N tractor
Powertrac

Powertrac 425 N

25 HP 2 Cyl
₹5.65 - ₹5.85 Lakh*

Which one should you buy?

Both of these are sold into the same segment, so the choice comes down to a handful of real differences rather than one being better than the other outright.

Price

The Escorts Steeltrac is roughly ₹3.21 lakh cheaper ex-showroom — about 57% less than the Powertrac 425 N. On road that gap widens slightly, because RTO tax and insurance are calculated on the higher figure. Whether the Powertrac 425 N earns that back depends entirely on the points below; if it does not, the cheaper machine is the better buy.

PTO power — the number that matters

Engine horsepower is the headline; PTO horsepower is what actually turns a rotavator or a thresher. Here the Powertrac 425 N delivers 5.9 HP more at the PTO (Escorts Steeltrac: 15.4 HP, Powertrac 425 N: 21.3 HP). That is roughly the difference between comfortably running a wider rotavator and working the engine hard to do it.

Lifting capacity

The Powertrac 425 N lifts 850 kg more (Escorts Steeltrac: 450 Kg, Powertrac 425 N: 1300 Kg). This decides which mounted implements the tractor can actually carry, and it is where cheaper models usually cut corners. Check it against the heaviest implement you own — loaded weight, not the dry weight in the brochure.

Engine

The Powertrac 425 N runs 2 cylinders against the Escorts Steeltrac's 1. More cylinders generally means smoother running and less vibration over a long day, at the cost of a little more fuel and slightly dearer servicing. Fewer cylinders is simpler to maintain, which matters if your nearest workshop is far.

Gearbox

Escorts Steeltrac: 15.4 HP. Powertrac 425 N: 8 Forward +2 Reverse. Count the low-range speeds rather than the total — puddling and rotavating need slow ground speed at working engine revs, and a box with too few low gears forces a compromise between the two.

Weight

The Powertrac 425 N is about 635 kg heavier. Weight is an advantage when braking a loaded trolley or pulling hard in draft work, and a disadvantage in wet fields and on soft ground where the Escorts Steeltrac will compact less and sink less.

Other differences

They also differ on brakes (Dry disc brake vs Multi Plate Oil Immersed Disc Brake), steering (Manual Steering vs Power Steering / Mechanical (optional)), warranty (2000 Hour or 2 Year vs 5000 hours/ 5 Year). None of these decide the purchase on their own, but oil-immersed brakes and power steering are worth paying for if you spend long days on the machine.

The short answer

Taken together the Powertrac 425 N leads on more of the dimensions that affect day-to-day work. It is the safer pick unless the Escorts Steeltrac is meaningfully cheaper for you after the dealer quote.

  • Wide rotavator, thresher or heavy PTO work: the Powertrac 425 N — it has the PTO horsepower to hold speed under load.
  • Heavy mounted implements: the Powertrac 425 N, which has the hydraulics to carry them.
  • Loaded trolley and haulage: the Powertrac 425 N — the extra weight helps it brake and hold a load on a gradient.
  • Tightest budget, or if none of the above apply to you: the Escorts Steeltrac. Paying for capability you never use is the most common and most expensive mistake at this size.

Before you decide

  • Prices here are ex-showroom. Add roughly 7–10% for RTO registration and insurance, and get the on-road figure in writing from the dealer, itemised.
  • Visit more than one dealer for each brand. Exchange value and finance terms vary between showrooms by more than the price gap between these two machines.
  • Ask how far the nearest workshop is for each brand. A tractor that is down for a week in season costs more than the difference between these two.
  • Drive both with an implement attached, not empty. An unloaded tractor tells you very little.

Specifications compared

Specification Escorts SteeltracPowertrac 425 N
Ex-showroom price ₹2.44 - ₹2.73 Lakh*₹5.65 - ₹5.85 Lakh*
Engine
HP 18 25 HP
Cylinders 1 2
Displacement (CC) 895 CC 1560 CC
Engine RPM 2300 RPM 2000 RPM
Air Filter Oil Bath Dry Type
Cooling System Coolant cooled Water Cooled
Torque 220 NM
Battery 12 v 75 Ah
Alternator 12 V 36 A
Transmission
Transmission Type Synchromesh Constant Mesh with Center Shift
Clutch Single clutch Single clutch
Gearbox 15.4 HP 8 Forward +2 Reverse
Forward Speed 25 kmph 2.2-26 kmph
Reverse Speed 4.53 kmph 2.7-8.5 kmph
Brakes
Brake Type Dry disc brake Multi Plate Oil Immersed Disc Brake
PTO
PTO Type MRPTO Single 540
PTO RPM 540 540 @1800
PTO Power (HP) 15.4 HP 21.3 HP
Hydraulics
Lifting Capacity (Kg) 450 Kg 1300 Kg
3 Point Linkage Automatic Depth & Draft Control
Steering
Steering Type Manual Steering Power Steering / Mechanical (optional)
Steering Column Single Drop Arm
Dimensions & Weight
Total Weight (Kg) 910 KG 1545 KG
Wheelbase (MM) 1524 MM 1815 MM
Overall Length (MM) 2530 MM 3050 MM
Overall Width (MM) 1040 MM 1370 MM
Ground Clearance (MM) 300 MM 315 MM
Turning Radius 2550 MM 3000 MM
Fuel Tank Capacity (L) 18 litre 50 litre
Wheels & Tyres
Wheel Drive 2 WD 2 WD
Front Tyre 5.20 X 14 5.00 X 15
Rear Tyre 8.00 X 18 11.2 X 28 8PR FX 515-E
Other
Warranty 2000 Hour or 2 Year 5000 hours/ 5 Year
Accessories Tool, Toplink, Canopy, Hook, Bumper, Drawbar Tools, Bumper , Hook, Top Link , Canopy , Drawbar

Compare other models

Build your own side-by-side comparison of any two tractors in the catalogue.

Open the comparison tool